Self-adhesive sealing butyl rubber harness “Harness Germetex»
Harness Germetex – self-adhesive sealing butyl rubber Harness with a fully working surface. It is used for sealing, waterproofing and bonding of two surfaces in construction, engineering, instrumentation, etc.
Operable in the temperature range from-60°C to + 100°C.
Example of designation “Germetex W Ø 5»
Technical characteristics of the tapes “Harness Germetex”
Penetration, 0.1 mm 30-100
Water absorption, 24 hours,%, not more than 0.3
Flow resistance, mm, at t=60°C, 24 h, not less than 2.0
Bond strength at separation from concrete, MPa, not less than 0.1
Vapor permeability, mg/(m·h·PA), not more than 0.01
Tensile strength, MPa, not less, in the transverse direction 0.1
Dimensions, diameter 3-50 mm
Method of application of the harness “Germetex”
Before using the harness “Germetex Harness” – the working surface of the joint must be cleaned from dust and dirt, dry from moisture, and in winter from ice, snow, frost. When working with the harness-it is necessary to remove the anti-adhesive coating and apply the harness to the work surface and roll so that the surface is solid without breaks and violations of the sealing layer. Next, if there is a node in the design to attach the second part.
Possible mechanical method of applying the harness (through the Universal nozzle on the electric drill)
Transportation and storage
The harness “Germetex” is transported by any type of transport in the conditions providing its protection from influence of atmospheric precipitation, mechanical damages; the harness is Packed in corrugated boxes. Store in dry warehouses at any temperature. If the harness is stored at an air temperature below 0°C, before using it must be kept in a warm (+20°C) room during the day .When handling to throw and turn over the container with the harness “Germetex” is prohibited.
