Germeteks LM NP – self-adhesive sealing butyl rubber tape brand LM NP and brand LM NP Next, with a one-sided work surface, covered on the one hand with an anti-adhesive coating (paper or polymer film), on the other hand non-woven fabric, used for sealing joints in full-assembled housing, when installing Windows, etc.; tape LMNP, on the side of non-woven fabric, can be plastered and painted(alkyd, acrylic and SILICON-organic paints).
Workable in the temperature range from minus 60°C to plus 100°C.
The name of the Movie, p. m Ed. izm. Norma up.
LM l 200*1.5 mm 12 m. p 24
LM NP 200*1.5 mm 12 m. p 24
LC 200*1.5 mm 12 m. p 24
LM isolon 200*3*1 mm 9 m. p 9
Adhesion to steel, N / 10 mm 3
Adhesion to concrete 6
Water absorption, 24 hours,%, not more than 0.3
Flow resistance, mm, at t=70°C, 24 h, not more than 2
Bond strength at separation from concrete, MPa, not less than 0.1
Vapour permeability, g / m2⋅24 2,5
Tensile strength, MPa, not less, in the transverse direction 0.1
Tape width, mm 10-200
Thickness, mm 01.may
Color: black, brown, grey, white on request according to the RAL range
Winding on the sleeve in rolls
Method of application of tapes ” Germeteks LM NP»
Before using the tape LM NP the working surface of the joint must be cleaned with a rag from dust and dirt, dry from moisture, and in winter from ice, snow, frost. To improve the adhesion of the tape to the surface, it is desirable to apply a layer of primer composition to the surface of the base.
Before working with the tape in a roll, it is necessary to remove one revolution of the anti-adhesive coating (paper or polymer film) and only then apply the tape to the work surface. Stick and roll the tape is so that the surface of the tapes were smooth without folds, blisters and air bubbles to the surface was solid without breaks and violations of the sealing layer. Capacity tape length is in the overlap.
Transportation and storage
Self-adhesive tape “Germeteks” is transported by any type of transport in conditions that ensured its protection from the effects of precipitation, mechanical damage; tape or cord is Packed in corrugated boxes. Tape “Germeteks” stored in dry warehouses at any temperature. If the sealant is stored at an air temperature below 0°C, then it must be kept in a warm (+20°C) room during the day before use. it is forbidden to throw and turn over container with a tape or a plait “Germeteks”at loading and unloading works .